Catalog

3 Point Post Hole Diggers

Danuser

Danuser 3 Pt Post Hole Digger

PTO MODELS G20/40 J20/80 F8
MOUNTING

ASAE Category I

3-pt. hitch

20-40 HP tractors

ASAE Category I or II

3-pt. hitch

20-80 HP tractors

ASAE Category I or II

3-pt. hitch

40 HP & above tractors

COMPONENTS

Gear Set / Ratio

straight bevel 3.1:1 straight bevel 3.1:1 spiral bevel 4.125:1
Driveline (fully guarded) 540 RPM Weasler Driveline 540 RPM Weasler Driveline 540 RPM Weasler Driveline
Bearings Timken tapered roller Timken tapered roller Timken tapered roller
Seals dual-lip, spring-loaded dual-lip, spring-loaded dual-lip, spring-loaded
Boom (with reinforcing rib) 3" O.D. tubing 3-½" O.D. tubing 3-½" O.D. tubing
Yoke 3" O.D. tubing with Category I pins 3" O.D. tubing with Category I or II pins 3" O.D. tubing with Category I or II pins
Output Spindle Size 2" round 2" round 2-9/16" round

AUGERS

Diameters

4, 6, 9, 12, 14, 16, 18, 24 4, 6, 9, 12, 14, 16, 18, 24 4, 6, 9, 10, 12, 14, 16, 18, 24, 30
Flighting double (replaceable) double (replaceable) double or single (replaceable)
Depths 29, 33, 40 29, 33, 40 29, 33, 40, 52
Extensions 7, 14 7, 14, 21 7, 14, 21
Points std., special, & aggressive duty std., special, & aggressive duty std., special, & aggressive duty
Cutting Edges plain, serrated, & Hole Digger Head plain, serrated, & Hole Digger Head plain, serrated, & Hole Digger Head
WARRANTY (gearbox) 5 years 5 years 5 years

 

G20/403 Pt Post Hole Digger
Danuser 3 Point Post Hole Digger Designed for 20 to 40 HP Tractor, Cat. I. Maximum Auger Diameter of 24 inches.
Cat. I$2,126.00
  
6347Adapter Kit
For John Deere 4110/4115 Tractors for G20/40
$144.00
20070Auger Adapter Guard
(2 inch Spindle) The shield is offered here as a separate accessory for G 20/40 Diggers shipped prior to Serial No. 11152.
2 in$90.00
6220Down Force Kit
Down Force Package for G20/40 Digger. Adds 500 lbs of Down Force. Less Hoses.
$721.00
6109Extension Kit
Yoke Extension Kit. Provides Approximately 6 inch of Additional Lift Height to Digger. Additional Height Will Vary by Make and Model of Tractor.
$95.00
J20/803 Pt Post Hole Digger
Danuser 3 Point Post Hole Digger Designed for 20 to 80 HP Tractor, Cat. I or Cat. II. Maximum Auger Diameter of 24 inches.
Cat. I/II$2,477.00
  
6818Down Force Kit
Down Force Package for J20/80 Digger. Adds 500 lbs of Down Force. Less Hoses.
$840.00
6109Extension Kit
Yoke Extension Kit. Provides Approximately 6 inch of Additional Lift Height to Digger. Additional Height Will Vary by Make and Model of Tractor.
$95.00
F-83 Pt Post Hole Digger
Danuser F8, 3 Point Post Hole Digger Designed for 40 HP and up Tractor, Cat. I. Maximum Auger Diameter of 36 inches.
Cat. I/II$3,731.00
  
7270Auger Adapter Guard
Furnished with these machines. Required on all machines with 2-9/16 inch spindle W/2-3/8 inch diameter Center column Augers.
$24.00
9545Auger Adapter Guard
Required on all machines when using 3-5/8 inch diameter center column augers.
$51.00
9049Mounting Kit
Crane Boom Yoke Assembly for 3-Point Mounting of 8900 Series Digger. Requires a 9051 or 9052 Pin Kit. Pin Kit is not Included.
$570.00
 
9051Pin Kit
Cat. I/II Hardware Kit for 9049 Mount.
$86.00
9052Pin Kit
Cat. II Pin Kit for 9049 Mount
$107.00
7480Hook and Yoke Assembly
Hook and Yoke Assembly for Use with 9079 Crane Boom Assembly for Lifting Up to 750 lbs
$137.00
9079Down Force Kit
Down Force Package for F8 Digger. Adds 500 lbs of Down Force. Less Hoses.
$813.00
20050PTO Conversion Kit
Conversion Kit - Used to convert any Danuser PTO Digger with a 622 Housing over to the 273 Pinion. NET PRICE. SUBJECT TO CREDIT CARD SURCHARGE.
$540.00
20060POT Conversion Kit
Conversion Kit - Used to convert any Danuser PTO Digger with a 622 Housing over to the 273 Pinion. NET PRICE.
$335.00